The rims for the 17 x 7.5 inch black machined face wheel rim (5x114.3 bolt pattern, ET 35 offset, CB 73.1 center bore) indicate that the wheel is compatible with vehicles that match these key attributes. Let's break it down:
 
 
Bolt Pattern: 5x114.3
 
 
This means the wheel has 5 bolt holes, and the distance between the centers of two adjacent holes is 114.3 mm (commonly referred to as a 5x114.3 bolt pattern). This is a very common bolt pattern used by many vehicles, especially Japanese and some American models.
 
 
 
 
Wheel Size: 17 x 7.5 inches
 
 
This indicates the wheel diameter is 17 inches, and the width is 7.5 inches. This is a typical size for many sedans, hatchbacks, and smaller SUVs.
 
 
 
 
Offset: ET 35
 
 
The offset of ET 35 means the mounting surface of the wheel is 35 mm away from the centerline of the wheel. This is a moderate offset, suitable for many vehicles, but you should verify if the offset works with your vehicle's suspension and fender clearance.
 
 
 
 
Center Bore: 73.1 mm
 
 
The center bore is the diameter of the hole in the center of the wheel that fits over the hub of the vehicle. A center bore of 73.1 mm is common among many Japanese cars, but it’s essential to check that your vehicle's hub diameter is either the same or smaller, or use hub-centric rings to ensure a proper fit.